Top 150+ Solved Material Handling MCQ Questions Answer

From 91 to 105 of 134

Q. Pneumatic tyres are not used for providing

a. speed

b. traction

c. friction

d. comfort

  • c. friction

Q. Escalators have the advantage of

a. continuity of motion

b. greater capacity

c. small space requirement

d. all of the above

  • d. all of the above

Q. On railways a dynamometer car is used for

a. recording the condition of track

c. dinning facilities

d. tourists

e. military purpose

  • a. recording the condition of track

Q. Dragline is generally used for

a. excavation

b. pushing

c. dragging

d. Any of the above

  • a. excavation

Q. For railway track, the sleepers are made of

a. wood

b. cast iron

c. RCC

d. Any of the above

  • d. Any of the above

Q. Which of the following cannot be handled using lifting magnets?

a. High manganese steel

b. Mild steel plates

c. Castings of cast iron

d. Scrap iron

  • a. High manganese steel

Q. The handling capacity of a drag line having bucket of one cubic metre capacity is expected to be least while handling

a. Sand

b. Clay, wet sticky

c. Gravel.

d. Clay, hard tough

  • b. Clay, wet sticky

Q. In which wire rope application, the highest factor of safety is necessary?

a. Tow ropes

b. Drag lines

c. Slings

d. Struck guys

  • c. Slings

Q. Small chain hooks are generally

a. cast

c. cast and machined

d. cold headed

e. drop forged

  • e. drop forged

Q. The thickness of belt is usually specified in terms of

a. merit number

b. thickness in mm

c. number of plies

d. index number

  • c. number of plies

Q. All of the following are free flowing materials EXCEPT

a. Soda ash

c. Mica, pulverized

d. Wheat

e. Lead salts

  • e. Lead salts

Q. A type size is specified as 8.25 - 20 in. In this 20 indicates

a. outer diameter in inches

b. cross-section of tyre in sq. inches

c. mean diameter of the tyre in inches

d. rim diameter in inches

  • e. rim diameter in inches

Q. In case direct current motors are used for electric overhead cranes, the motors used are generally

a. shunt wound

c. series wound

d. differentially compound wound

e. cumulatively compound wound

  • c. series wound

Q. Which of the following characteristic can be assigned to metallic dusts?

a. Abrasive

b. Corrosive

c. Sticky

d. Hygroscopic

  • a. Abrasive

Q. Which railway sleeper provides the best rigidity?

a. Cast iron

b. RCC

c. Wooden

d. Cast steel

  • b. RCC
Subscribe Now

Get All Updates & News