Top 1000+ Solved Heat Transfer (HT) MCQ Questions Answer

From 136 to 150 of 836

Q. Pick out the wrong statement.

a. The controlling resistance in case of heating of air by condensing steam is in the air film

b. The log mean temperature difference (LMTD) for counter flow and parallel flow can be theoretically same when any one of the fluids (hot or cold fluid) passes through the heat exchanger at constant temperature

c. In case of a 1 - 2 shell and tube heat exchanger, the LMTD correction factor value increases sharply, when a temperature cross occurs

d. Phase change in case of a pure fluid at a given pressure from liquid to vapor or vice-versa occurs at saturation temperature

  • c. In case of a 1 - 2 shell and tube heat exchanger, the LMTD correction factor value increases sharply, when a temperature cross occurs

Q. Double pipe heat exchangers are used

a. When heat transfer area required is very high

b. When heat transfer area required is very low, i.e. (100-200 ft2).

c. Because it occupies less floor area

d. Because it is less costly

  • b. When heat transfer area required is very low, i.e. (100-200 ft2).

Q. Sensible heat of hot industrial flue gases cannot be recovered by a/an

a. Economiser

b. Regenerator

c. Ceramic recuperator

d. None of these

  • d. None of these

Q. A body is called grey if the monochromatic emissivity of the body is

a. Zero

b. Unity

c. Same for all wavelengths

d. Different for all wavelengths

  • c. Same for all wavelengths

Q. While the total emissivity of a perfect black body is unity, the same for a real body is

a. 0

b. 1

c. > 1

d. Between 0 and 1

  • d. Between 0 and 1

Q. Crystal size in a continuous crystalliser depends upon the

a. Rate of heat transfer

b. Degree of turbulence

c. Degree of super-saturation

d. All (A), (B) and (C)

  • d. All (A), (B) and (C)

Q. The critical radius 'r' of insulation on a pipe is given by

a. r = 2k/h

b. r = k/h

c. r = k/2h

d. r = h/k

  • b. r = k/h

Q. Boiling of milk in an open vessel is an example of __________ boiling.

a. Film

b. Sub-cooled

c. Saturated nucleate

d. None of these

  • a. Film

Q. In an extended surface heat exchanger, fluid having lower co-efficient

a. Flows through the tube

b. Flows outside the tubes

c. Can flow either inside or outside the tubes

d. Should not be used as it gives very high pressure drop

  • b. Flows outside the tubes

Q. Black liquor generated during paper manufacture is concentrated in a

a. Single effect evaporator

b. Single effect evaporator followed by a crystalliser

c. Multiple effect evaporator

d. Multiple effect evaporators followed by a crystalliser

  • c. Multiple effect evaporator

Q. What is Nusselt number?

a. CP. µ/k

b. hD/k

c. h. CP/µ

d. CP. µ/h

  • b. hD/k

Q. If h1 = inner film co-efficient and /h2 = outer film co-efficient, then the overall heat transferco-efficient is

a. Always less than h1

b. Always between h1 and h2

c. Always higher than h2

d. Dependent on metal resistance

  • b. Always between h1 and h2

Q. Convective heat transfer, in which heat is transferred by movement of warmed matter isdescribed by

a. Fourier's law

b. Newton's law of cooling

c. Fick's law

d. None of these

  • b. Newton's law of cooling
Subscribe Now

Get All Updates & News